USH3001 HDMI / SDI Video Capture Card firmware
Updating the firmware will optimise SDI and HDMI compatibility,
Updating the firmware for recently purchased items only
USH3001 HDMI/SDI Video Capture Card upgrade method ( Windows only):
1. Unzip the compressed file;
2. Just connect the capture card to the computer with a USB cable,
3. Launch the “SDI2USB3_0417.exe” ,
4. Click “Open File” and select the firmware “xingyuan_189_110.img”,
5. Click “Download”. When the window appears, “Upgrade part2 OK. ” mean the firmware upgrade is complete.
6. After upgrading the firmware, plug and unplug the USB cable.
----------------------------------------------------------------------------------------------------------
USH3001 HDMI/SDI Video Capture Card upgrade method ( Windows only):
1. Unzip the compressed file;
2. Just connect the capture card to the computer with a USB cable,
3. Launch the “FacTools.exe” ,
4. Click “Load Firmware” and select the firmware “XINGYUAN-199-115.img”,
5. Click “Download Firmware”. When the window appears, “Parameter write to device success... ” mean the firmware upgrade is complete.
6. After upgrading the firmware, plug and unplug the USB cable.
*It is not recommended to upgrade if there is no failure*